Extra Parts

Couldn't decide which color handles to get? Need an extra sheath? We'll get you squared away in no time with our long list of factory options.

Not sure if you should be clicking on the 'New Spec' or 'Old Spec' button? Here are some ways to quickly tell them apart:

New Spec: Introduced as preorders during the SURVIVE! Starter Campaign in early 2015, though they started finishing production near the end of 2015. They were first made available for regular ordering at the start of 2016.

Finish:

Peened
Matte gray (Looks similar to a coating)
Sharp corners
Perimeter is smooth (machined)

Handles:

Curved through your hand
Much more contoured than old spec handles
Fasteners use a Torx T-25 bit

Old Spec: Any knives produced before the major design revisions that debuted in the SURVIVE! Starter. These knives were produced in 2014 and earlier, though the last of the blades were still sold through 2015.

Finish:

Tumbled
Stonewashed (looks similar to galvanized steel)
Rounded corners
Perimeter may have lines from laser cutting

Handles:

Relatively straight from blade to pommel
Some 3D contouring
Fasteners are slotted for flat head bits

Brands

Belt Clip

$8.00

This is place to find and order extra or replacement belt clips for our New Spec kydex sheaths. Our molle compatible belt clips for our GSO series come with hardware to attach directly to your sheath and can be adjusted for right and left-handed carry...

View Product

GSO-2.7 Fasteners

$7.00

Pick up an extra set of Torx T-25 fasteners for your SURVIVE! GSO-2.7. All of our fasteners are precision machined from 416 stainless steel bar stock and are produced right here in the USA. Since our fastener sets are a custom length for each...

View Product

GSO-4.7 Fasteners

$10.00

Pick up an extra set of Torx T-25 fasteners for your SURVIVE! GSO-4.7. All of our fasteners are precision machined from 416 stainless steel bar stock and are produced right here in the USA. Since our fastener sets are a custom length for each...

View Product

Necker II Fasteners

$7.00

Pick up an extra set of fasteners for your SURVIVE! Necker II. All of our fasteners are precision machined from 416 stainless steel bar stock and are produced right here in the USA. Since our fastener sets are a custom length for each knife model, double...

View Product

Necker II Handles

$20.00

We have a wide range of handle options available for the Necker II. They come in 3 different materials: -Canvas is a medium cotton weave, impregnated with a phenolic resin. This coarse fabric based material has good texture, for a secure grip even...

View Product

Necker II in a Spring Flat Dark Earth Kydex Sheath

Necker II Sheaths

$15.00

These are the factory kydex sheaths that are typically sold with a SURVIVE! Necker II. They are designed to be versatile and come with a molle compatible belt clip. The sheath will also accept molle-loks, tek-loks and a variety of other mounting options...

View Product

Necker with its OD Green Kydex sheath using a neck chain instead of the provided clip.

Necker Sheaths

$15.00

These are the factory kydex sheaths that are typically sold with a SURVIVE! Necker. They are designed to be versatile and come with a molle compatible belt clip. The sheath will also accept molle-loks, tek-loks and a variety of other mounting options...

View Product

GSO-3.5 Fasteners (Old Spec)

$7.00

Pick up an extra set of fasteners for your SURVIVE! GSO-3.5. All of our fasteners are precision machined from 416 stainless steel bar stock and are produced right here in the USA. Since our fastener sets are a custom length for each knife model, double...

View Product

Natural Brown Canvas handle scales for the GSO-3.5

GSO-3.5 Handles (Old Spec)

$25.00

If you are looking for an extra set of handles for your GSO-3.5 you are in the right place. The handles come in 3 different materials: -Canvas is a medium cotton weave, impregnated with a phenolic resin. This coarse fabric based material has good...

View Product

GSO-3.5 in a Spring Flat Dark Earth Kydex sheath

GSO-3.5 Sheaths (Old Spec)

$20.00

These are the factory kydex sheaths that are typically sold with a SURVIVE! GSO-3.5. They are designed to be versatile and come with a molle compatible belt clip. The sheath will also accept molle-loks, tek-loks and a variety of other mounting options...

View Product

GSO-4.1 Handles (Old Spec)

$30.00

If you are looking for an extra set of handles for your GSO-4.1 you are in the right place. The handles come in 3 different materials: -Canvas is a medium cotton weave, impregnated with a phenolic resin. This coarse fabric based material has...

View Product

GSO-5.1 Fasteners

$10.00

Pick up an extra set of Torx T-25 fasteners for your SURVIVE! GSO-5.1. All of our fasteners are precision machined from 416 stainless steel bar stock and are produced right here in the USA. Since our fastener sets are a custom length for each...

View Product

Mid-Sized Handles (Old Spec)

$33.00

This is the place to be to pick up an extra set of handles for your mid-sized GSO knives. Mid-sized includes the GSO-5, GSO-5.1, GSO-6, and GSO-7/7. These are for the old spec GSO knives. New spec materials will be available as those SURVIVE!...

View Product

GSO-4.7 and GSO-5.5 Handles (2020)

$45.00

Looking for an extra set of scales for your new GSO-4.7 or GSO-5.5? This is the place to pick those up. Just remember that the fasteners are not included so let us know if you need an extra set of those as well. These contoured handles...

View Product

GSO-10 Handles (Old Spec)

$38.00

This is where you want to be if you are looking to pick up a set of handles for your old spec GSO-10. The new spec materials will be available as those SURVIVE! models finish production. -Canvas is a medium cotton weave, impregnated with a...

View Product

GSO-5 Sheaths

$25.00

These are the factory kydex sheaths that are typically sold with a SURVIVE! GSO-5. They are designed to be versatile and come with a molle compatible belt clip. The sheath will also accept molle-loks, tek-loks and a variety of other mounting options. The...

View Product

GSO-5.1 Handles (2019)

$45.00

NOTE: These WILL NOT fit on the new spec GSO-5.1 blades that were produced in 2015. Looking for an extra set of scales for your new GSO-5.1? This is the place to pick those up. Just remember that the fasteners are not included so let us...

View Product

GSO-8 Handles (2019)

$60.00

While the GSO-8 Preorder is available, you can pick up extra sets of handles as well. These will be delivered along with your Preordered GSO-8 Looking for an extra set of scales for your new GSO-8? This is the place to pick those up. ...

View Product

Extra Parts

Browse by

Categories

Brands

Price Filter

Sort by

Belt Clip

GSO-2.7 Fasteners

GSO-4.7 Fasteners

Necker II Fasteners

Necker II Handles

Necker II Sheaths

Necker Sheaths

GSO-3.5 Fasteners (Old Spec)

GSO-3.5 Handles (Old Spec)

GSO-3.5 Sheaths (Old Spec)

GSO-4.1 Handles (Old Spec)

GSO-5.1 Fasteners

Mid-Sized Handles (Old Spec)

GSO-4.7 and GSO-5.5 Handles (2020)

GSO-10 Handles (Old Spec)

GSO-5 Sheaths

GSO-5.1 Handles (2019)

GSO-8 Handles (2019)

Browse by

Categories

Refine by

Brands

Shop by brand

Price Filter

Shop by price

Sort by